Hi, since there is no way atm for most of you to create CTI 2 Card you can request Supplemental cards here, i will create the card and pusblish it here.
Rules:
If you want to see your card ported to CTI 2 you have to do some work too...
1. Create / Recreate the card in the Card Creator the CTI 2 option / flag has to be set.
2. Post your card here and write a short explaination how the card should work (if it is not 100% clear from the card text).
3. Gifs arent supported in CTI 2 for now!
4. The card / image should be of high quality.
5. A straight version should always be delivered too.
If i like your card i will create a CTI 2 card of it, you can also send me private messages with requests.
CTI 2 Card Requests [Supplemental]
- dess
- Old School
- Keys: 0,00
- Posts: 45
- Joined: 23 Jun 2015, 23:50
- Type: Submissive
- Orientation: Bi
- Contact:
I think we should be really smart about what CTI 2 cards get made (especially due to limited resources). I would like to make sure ambiguous cards don't get made.
We need cards that use toys for sure.
We need cards that use toys for sure.
-
Micha0879
- Horny
- Keys: 0,03
- Posts: 16
- Joined: 17 Apr 2016, 15:14
- Location: Germany
- Gender: Male
- Type: Submissive
- Orientation: Bi
- Contact:
Hi, I´m in the process of recreating some cards from the "Riding on the Edge" scenario - actually I have created those two cards for CTI2:
"Repeat: Start with 4 strokes, add 4 strokes per slide. If you reach 40, reset stroke count to 4" and the decreasing part.
Picture is still missing, but Java code seems to work.
@0131: Have some problems that the card is showing up under the "Supplemental" category of the CTI2 tab, instead it shows up under the Core Set. In the jar folder structure it is under "Supplemental\Stroke_IT". Some advice/hint is needed Can send you the source code if needed...
Maybe we should open a new subcategory "CTI2 card creation".
"Repeat: Start with 4 strokes, add 4 strokes per slide. If you reach 40, reset stroke count to 4" and the decreasing part.
Picture is still missing, but Java code seems to work.
@0131: Have some problems that the card is showing up under the "Supplemental" category of the CTI2 tab, instead it shows up under the Core Set. In the jar folder structure it is under "Supplemental\Stroke_IT". Some advice/hint is needed Can send you the source code if needed...
Maybe we should open a new subcategory "CTI2 card creation".
- 0131
- Site Admin
- Keys: 1 036,47
- Posts: 1021
- Joined: 06 Jun 2015, 18:12
- Gender: Female
- Type: Switch
- Orientation: Bi
- Contact:
Its good if the card is shown as Supplemental, the Core Set is finished we wont add more cards to it.
Every addidion to the Core Set is handled as a Supplemental card.
I will update the bitbucket soon, i wrote new classes for the supplemental cards.
Every addidion to the Core Set is handled as a Supplemental card.
I will update the bitbucket soon, i wrote new classes for the supplemental cards.
༼ つ ◕_◕ ༽つ Can i has CTI pls
- Rothaon
- Created software for the community!
- Keys: 125,58
- Posts: 421
- Joined: 13 Mar 2016, 16:25
- Location: Spain
- Gender: Male
- Type: Dominant
- Orientation: Gay
- Contact:
Here's a request:
- This cards increases stroke ratio by 0.1 each time it appears.
- Text should show the new stroke ratio.
- It should force the next card to be this same card and appear after 20 pictures.
And it's supposed to be a deck by itself so I guess it should be forced to be the first card to appear (or set a very high chance).
- This cards increases stroke ratio by 0.1 each time it appears.
- Text should show the new stroke ratio.
- It should force the next card to be this same card and appear after 20 pictures.
And it's supposed to be a deck by itself so I guess it should be forced to be the first card to appear (or set a very high chance).
- Attachments
-
- CTI2.Rothaon.Leger.Stroke It!.01.png (776.51 KiB) Viewed 6230 times
- 0131
- Site Admin
- Keys: 1 036,47
- Posts: 1021
- Joined: 06 Jun 2015, 18:12
- Gender: Female
- Type: Switch
- Orientation: Bi
- Contact:
Hi Sets are more work and i still need to add some supports for new sets this is only for Supplemental cards.
Your card descriptions doesnt make much sense, if this card forces the next card to be itself again and again and again then no other card will ever be drawn, wouldn't that be a bit boring?
You cant increase the stroke ratio, its a mathematical value:
You have to change aleast one of the values on the left.
Your card descriptions doesnt make much sense, if this card forces the next card to be itself again and again and again then no other card will ever be drawn, wouldn't that be a bit boring?
You cant increase the stroke ratio, its a mathematical value:
You have to change aleast one of the values on the left.
༼ つ ◕_◕ ༽つ Can i has CTI pls
- Rothaon
- Created software for the community!
- Keys: 125,58
- Posts: 421
- Joined: 13 Mar 2016, 16:25
- Location: Spain
- Gender: Male
- Type: Dominant
- Orientation: Gay
- Contact:
Set it as a supplemental card, it doesnt matter mucho right now.
It is supposed to be a test, it runs until you edge, then you get a score.
I just wanted it to be automatic to get some numbers.
Anyway, I just saw I could do it with the procedure system, so dont worry about it
It is supposed to be a test, it runs until you edge, then you get a score.
I just wanted it to be automatic to get some numbers.
Anyway, I just saw I could do it with the procedure system, so dont worry about it
-
- Information
-
Who is online
Users browsing this forum: No registered users and 2 guests